Stellar Phoenix Zip Recovery

Cyclic Redundancy Check is a method of detecting and correcting errors by adding bits derived from a block or string of bits to the block. Sometimes, you may encounter some errors related to Cycle Redundancy Check while extracting the zip file. This happens due to virus attack, improper or incomplete downloading, network hardware problems, etc. These errors can cause severe damage to your zip file leading to file corruption and inaccessibility of data. In such a situation, you need a valid data backup file to restore your data. However, if the backup is not available, even then you will be able to restore all your data using a powerful repair zip file software.

For instance – After downloading a zip file, when you try to extract it, the process fails and you receive below mentioned error message:

“Corrupt Zip File”

OR

“Bad CRC”

These error messages appear when you try to unzip the zipped archives in your computer system. After this error message flashes, you fail to access any of the files stored in the zipped or compressed folder.

Cause:

The above mentioned error message occurs due to corruption or damage of zip file. In a zip file, when a file is added, WinZip calculates the CRC value and saves it in the zip file. Further, when a zip file is extracted, the value of the extracted file is calculated by WinZip. Then, WinZip compares this value with the previous value. And if the two do not match, then the error message appears.

Resolution:

Consider the following measures to resolve the issue:

Download the Zip file again and then try to extract files. It is possible that files might get extracted without errors.
If not, then the only way out for you would be to repair corrupted Zip file using zip recovery solutions. The advanced zip repair applications employ high-end scanning mechanisms to ensure systematic repair of the Zip file to retrieve your data. Embedded with interactive graphical user interface, these tools are easy to use and understand, hence do not require any prior technical skills.

WinZip is a popular compression application used to compress one or more files into a single container file. It creates a .zip file and is also needed to open or unzip the files from the zipped folder. But, like every other computer application, WinZip also has certain flaws. At times, you may face some issues while opening the compressed or zipped folder, which indicates corruption of the zipped folder. Few reasons behind its corruption could be virus, improper system shutdown, power failure, and more. Zip file corruption causes inaccessibility of data stored in it. But, you can still retrieve your data in the presence of a data backup file. However, if the backup is not present, then you will need to repair zip file using a third-party application.

Consider a situation – If you insert the compressed (zipped) folder in Microsoft Word or Word Pad and then try to open the compressed folder, the following error message appears:

“The Compressed (zipped) Folder is invalid or corrupted.”

In case, Microsoft Word has a security level setting of high or medium, you may come across the below error message while opening the compressed folder:

“You are about to activate an embedded object that may contain viruses or be otherwise harmful to your computer. It is important to be certain that it is from a trustworthy source. Do you want to continue?”

On clicking ”Yes’ in this error message, you again receive the former error message. As a result, the files stored in the zipped folder becomes inaccessible, leaving you at the verge of data loss.

Cause:

The above error message mainly occurs due to corruption of the zip archive. In the above mentioned scenario, corruption of zip archive can occur due to two reasons:

It can occur if Word application has medium or high security level setting.
Corruption can also occur if the zip folder contains any virus infected file.

Resolution:

To resolve the above issues, you need to repair zip file using a powerful zip repair software. These applications employ highly innovative and influential scanning mechanism to repair and restore the corrupted zip file. Built with rich graphical user interface, these tools are easy to use and understand and hence do not require any prior technical skills.

Though, Zip file format is a useful compression method, at the same time it is vulnerable to corruption, due to which you might come across an error message while trying to open the Zip file. Sometimes, you may receive an error message after downloading the Zip file with Internet Explorer. This happens if the HTTP compression is enabled for the .zip file The reason behind such behavior may be corruption of the Zip file, as a result of which the data stored in the Zip file may no more remain accessible to you. In order to access your data, you need to have a copy of a data backup file. But, in case you have not backed up your data, then the only way by which your data can be retrieved is by using a good-quality zip repair application.

Consider a scenario – Sometimes, when you download a Zip file using Internet Explorer 6 and try to open the Zip file, the following error message appears:

“The compressed (zipped) folder is invalid or corrupted.”

After this error message, you will not be able to access the Zip file. Consequently, all the data that was stored in the Zip file becomes inaccessible. Furthermore, you will not be able to open the Zip file, no matter how many times you try to do so.

Cause:
The above mentioned error message occurs if the HTTP compression is enabled or activated for Zip files on the web server, from where the Zip file is downloaded. And if the HTTP compression is enabled on the web server, the Zip file gets encoded and then sent to Internet Explorer. When Internet Explorer receives the HTTP-compressed Zip file, then it is directly transferred to the program that is configured to un-zip the zip file without decoding the HTTP compression.

Resolution:
To resolve the issue, you need to repair zip file using a third-party application, known as zip repair software. These application are specially designed to resolve all the corruption issues associated with Zip file format. In addition, these tools are embedded with highly intuitive and innovative graphical user interface that makes them user-friendly and hence do no require any prior technical knowledge.

Though, zip format is a useful method of compressing the file size, it is of no use when the files cannot be extracted from the zipped folder. Sometimes, Windows blocks the extraction of files present in the zipped folder, due to which the Zip file becomes inaccessible, which may further cause data loss. The reason behind this could be corruption of the Zip file, which occurs due to improper system shutdown, virus, power failure, and many alike. In such situations, it becomes necessary to repair the Zip file as it may contain important information. Therefore, to retrieve your data from the corrupted Zip file, you need to use an effective zip repair software.

Consider a situation – Sometimes, when you try to extract the files from the .zip file, the process fails and you receive the below mentioned error message:

“Windows has blocked the file c:programfile from being extracted.
Would you like to continue trying to extract files, skip all further blocked file notifications, or cancel the extract operation?”

After this error message flashes, the extraction process stops abruptly and all the data stored in the .zip file gets inaccessible.

Cause:

The above mentioned error message may occur due to the following reasons:

Windows blocks the extraction process if the zipped folder contains any virus infected files. Windows does not allow to extract the files due to security reasons.
If the Zip file is corrupt or damaged due to which WinZip fails to extract it.

Resolution:

To resolve the problem, consider the following measures:

In case the problem has occurred due to virus infected files in the zipped folder, then use a latest anti-virus application to rule out the virus.
But, if the problem has occurred due to corruption of the Zip file, then you need to repair the Zip file using an efficient repair zip file software. Such applications scan and repair the corrupted Zip file systematically with the help of its sophisticated scanning algorithms. Enriched with interactive graphical user interface, these Zip Repair tools are easy to use and understand and do not require any prior technical skills.

A Zip file format, also known as an archive format, is used to compress one or more files to reduce the file size and the storage space of the files. This is done to facilitate easy transfer of the Zip file.
But, a Zip file is not immune to corruption and at times, you might experience problems while extracting files from the Zipped folder. This generally happens when the Zip file is either not compatible with the Zip file extractor or is corrupt. In such situations, data becomes inaccessible which may further lead to serious loss in your work area. To prevent this, you need to retrieve your data systematically using the new-generation, third-party zip repair software.

Consider while working on a Windows Vista based computer, when you use WinZip to extract a compressed file that has a .zip file extension, you encounter the below mentioned error message:

“This file was compressed using an unknown compression method. Please visit www.winzip.com/wz54.htm for more information. The compression method used for this file is 98. error: no files were found – nothing to do “

This error message indicates that contents stored in the compressed file cannot be accessed. 

Cause:
Possible causes for the above error message are:
The Zip file was created using WinZip1.0
Your computer system has an older version of WinZip.
The Zip file is corrupt.

Resolution:
Resolve the problem using following methods:
Compress the file to a Maximum in WinZip 10 with following steps:
1.In the File menu, click New Archive.
2.Type name for the compressed file in the “File Name:” box of the “New Archive” dialog box and click OK. 
3.In the Add dialog box which opens next, chose the files that you want to add to the archive, select “Maximum ( portable)” in the “Compression” box, and then click Add. 

In case, the above method fails to resolve the problem, then you need to repair zip file by using a powerful Zip Repair software. Such applications employ sophisticated algorithms to quickly repair the corrupted zip file. Embedded with rich graphical user-interface, the software is easy to use and understand without any prior technical skills.

Zip files generally use “.zip” or “.ZIP” file extensions and the MIME ( Multipurpose Internet Mail Extensions) media type application/ zip. At times you observe certain errors in the Zip file, which occur due to some Internet problems. These errors generally occur while downloading the Zip file, which leads to its corruption. As a result of the corruption, the data stored in the Zip file gets inaccessible. To overcome such situations, you can restore your data from a recent backup file. However, if you have not maintained a backup, or the backup gets corrupted, then you need to Repair Zip File to retrieve your data.

Consider a practical situation- When you try to open a .zip file after downloading it from a Microsoft Windows SharePoint Services document library, you receive the below mentioned error message:

“Cannot open file: it does not appear to be a valid archive. If you downloaded this file, try downloading the file again.”

The data stored in the .zip file becomes inaccessible after the occurrence of the above error message.

Cause:
The above situation generally occurs if the HTTP compression is turned on in the Web Sites properties of Microsoft Internet Information Services (IIS) on the SharePoint virtual server. As a result, when you download a zip file, IIS encodes it as GZIP and the browser client passes the file directly to the unzip program, without GZIP decoding the file.

Resolution:
Try resolving the above issue by changing the MIME type for .zip file from application/ x-zip-compresses to application/ octet-stream. To do so, follow the steps below:

In the Start menu, select the Internet Information Services (IIS) Manager in the Administrative tools option.
Then, expand the server (local computer), right click Web Sites and click Properties.
Click MIME types and scroll down the registered MIME type list to find the .zip entry.
Then you need to click .zip application/x- zip-compressed entry and then click Edit.
Change the MIME types value to application/ octet-stream.
Lastly, stop and then restart the IIS Admin Service to apply the changes.

In most cases, the above given resolutions will help you to resolve the Zip related issues. But, if the problem persists, then Repair Zip File to retrieve and restore the data from the corrupted .zip file. Incorporating highly powerful scanning algorithms, these Zip Repair applications ensure complete retrieval and restoration of your data.

Stellar Phoenix Zip Recovery is specially designed to fix all the Zip related issues orderly and successfully. The software maintains the integrity of data with its non-destructive nature. Built with high graphical rich user interface, the Zip Repair utility is easy to use and understand. The read-only application is compatible with Windows Vista, XP, 2003, and 2000 operating systems.